Montana GLASS Paint for painting of glasses, bottles and glass vases for decorative purposes or glass building blocks.
- Producing frosted glass effect or frozen glass
- Decorative semi-transparent coatings for glasses, bottles, vases or glass stones ( Seaglass )
- Partial painting for window panes
- Lightfast, Scratch, shock- and impact proof
- Very good adhesion-quick drying
- NOT food-safe
- Somewhat dish-washer-proof (depends on heat and detergent used)
- Generating a milky or "frozen glass" effect
- Painting of glasses, bottles and glass vases for decorative purposes or glass building blocks
- Partial painting for windows to add privacy
INSTRUCTIONS FOR USE
Shake can vigorously for 3 minutes before use. The spraying distance should be approx. 15-20 cm. Apply Montana GLASS paint in several thin layers. Surface must be clean and free of fat or dust and objects made from glass must be cleaned with glass cleaner before the paint is been applied. Sealing with a clear coat recommended, especially for objects that are being used on a regular basis or on objects which are outside most of the time
Always test spray on a non-visible area to check the compatibility of lacquer or paint. For optimal lifespan, store cans with the nozzle on.
PRODUCT NAME: Montana Cans GLASS Paint
HS CODE: 32082090
COUNTRY OF ORIGIN: Germany
NOZZLE: Flat Jet Medium
RECOMMENDED NOZZLES: Flat Jet Nozzles for Objectpainting
LAQUER BASE: NC-Acrylic
PRESSURE LEVEL: Low pressure
GLOSS LEVEL (60° angle according to DIN 67530): 13 GU matte
HEAT RESISTANCE: Up to 80°C (176°F)
COVERAGE: semi-transparent lacquer
OVERPAINTING: Can be overpainted with Synthetic- or Acrylic Lacquer after the lower layer is completely cured (after 6-8hrs)
DRYING TIME AT 20°C (68°F) AND 50% RELATIVE HUMIDITY:
- Dust/Touch dry: approx. 3-5 min/ 1h
- Overpainting after 6-8h
- Fully cured after 24h
Drying time depends on temperature, humidity and thickness of coating.
OPTIMAL PROCESSING CONDITIONS:
- Temperature 10° - 25°C/50 - 77°F
- Surface temperature 5° - 40°C/40 - 105°F
- Air humidity max. 60%
DANGEROUS GOODS INFORMATION
- Dangerous goods class 2.1
- Shake well for at least three minutes
- Surface must be clean and free of fat or dust
- Objects made from glass must be cleaned with glass cleaner before the paint is been applied
- Spraying distance: 20-30cm/8-12in
- Before using the paint on synthetic materials, a compatibility test must be made first!
- Not to be used on Acrylic or Plexiglas®
- Must be applies in several thin layers (4-5min apart). The more layers are applied, the more opaque the layer gets.
- Can be combined with Acrylic Markers and other Acrylic paint
- Sealing with a clear coat recommended, especially for objects that are being used on a regular basis or on objects which are outside most of the time
- Gloss level varies drastically between different glass and synthetic surfaces
FREQUENTLY ASKED QUESTIONS
ARE MONTANA GLASS PAINT 250ML COLORS THE SAME AS NORMAL COLORS?
Montana GLASS PAINT 250ml semi transparent colors in a matte finish that are ideally used on glass-based materials. Once applied to glass, the light passing through the painted object appears to take on the color that has been applied.
DO THE MONTANA GLASS PAINT 250ML COLORS HAVE THE SAME FINISH AS NORMAL MONTANA COLORS?
The GLASS PAINT 250ml colors in comparison to normal opaque Montana Cans color formulations are a greater mix of clear coat and paint vehicle in relation to the amount of pigment. The finish grade can be described as matte or frosted.
HOW DO I PREPARE A GLASS SURFACE TO USE MONTANA GLASS PAINT 250ML COLORS ON IT?
The GLASS PAINT 250ml colors work best on clean and dry glass surfaces. remove dust, oils and fat with window cleaner and ensure the surface is completely dry before application. Make sure the can is shaken for at least 3 minutes before use and avoid application in wet or humid environments.
HOW LONG DOES MONTANA GLASS PAINT 250ML TAKE TO DRY?
At 20°and 50% humidityMontana GLASS PAINT 250ml takes 3-5 minutes to become dust dry, 1 hour to become touch dry and 24 hours to be completely cured and hardened.
CAN I APPLY MULTIPLE COATS OF MONTANA GLASS PAINT 250ML?
It is possible to apply as many coats of Montana GLASS PAINT 250ml as desired. The more coats applied, the less light can pass through the color. In this way you can manipulate the amount of light passing through your glass and the appearance of the color as it appears out the other side.
ARE MONTANA GLASS PAINT 250ML COLORS LIGHTFAST OR UV RESISTANT?
Montana GLASS PAINT 250ml colors are as light fast and UV resistant as possible for a transparent paint that actively allows light to pass through it. Montana GLASS PAINT 250ml colors contain premium grade European pigments and have UV blockers in their clear coat mixture.
CAN I USE MONTANA GLASS PAINT 250ML COLORS IN CONJUNCTION WITH OTHER AEROSOL COLORS?
Yes. The Montana GLASS PAINT 250ml range can be used in conjunction with synthetic and acrylic based colors as long as they have been allowed to dry completely and cure for 24 hours.
ARE MONTANA GLASS PAINT 250ML COLORS AS DURABLE AS OTHER MONTANA COLORS?
A part from issues of durability related to pigment load, Montana GLASS PAINT 250ml are durable, scratch proof and hardwearing subject to their adhesion to the glass surface. If the surface was not clean, wet, or had traces of dust oils or fat, then the longevity and durability may be compromised. Apart from proper preparation, it is also possible to coat your finished work with Montana VARNISH to increase durability and resistance to damage in any form.
CAN I USE MONTANA GLASS PAINT 250ML COLORS ON DRINKING GLASSES OR PLATES?
The Montana GLASS PAINT 250ml is not to be consumed by humans or animals. Therefore it is important not apply it to the area of any surfaces that will come in direct contact with the consumption of food or beverages.
CAN I PUT OBJECTS PAINTED WITH MONTANA GLASS PAINT 250ML COLORS IN THE DISHWASHER?
We do not recommend cleaning items painted with Montana GLASS PAINT 250ml in dish washers. The Montana GLASS PAINT 250ml has limited resistance to the extreme heat generated in dish washers and the chemicals used in the cleaning products within them. As such, even with extra Montana VARNISH coating, items painted with Montana GLASS PAINT 250ml and then cleaned in a dish washer will eventually fatigue and deteriorate.
HOW DO I REMOVE MONTANA GLASS PAINT 250ML COLORS IF I NEED TO?
If you need to remove Montana GLASS PAINT 250ml from glass, it is possible to do so by scraping it off, slowly and carefully with a fine flat blade. Be very careful not to scratch the glass underneath or any wood/rubber seals or edges. Alternatively applying Montana ACETONE spray, allowing to soak shortly and then scraping off could be an option. However please note if the ACETONE comes in contact with any seals, it may damage or break them.
CAN I USE MONTANA GLASS PAINT 250ML COLORS ON ACRYLIC OR PLEXI GLASS?
Montana GLASS PAINT 250ml is not made to be applied to acrylic or plexi glass surfaces. We do not recommend doing so. Although the product will most likely apply and color the surface as desired initially, doing so may result in the solvents from the Montana GLASS PAINT 250ml paints agitating, etching into or damaging the acrylic/plexi glass surface.