Montana NIGHTGLOW Effect Spray is a high-grade acrylic quality which contains luminescence-pigments, that store light (absorbed energy) and emit the light in darkness. This luminiscence-effect is only visible at total darkness. The period is depending on intensity or irradation and thickness of paint layer (it is recommended to apply multiple layers of NIGHTGLOW paint lacquer on the primed surface). The highest possible degree of shining is immediately after loading the painted object then it fades away. For indoors and outdoors applications. For best glow effects use in a completely dark environment without any light sources. Use a strong source of light to load the effect paint temporarily. The effect spray is suitable for all smooth, rough or light responding primed surfaces. e. g. metal, wood, hard plastics, primed carton, walls etc. We recommend to prime the ground with Montana GOLD Shock WHITE 9100 to achieve best glow effects. Consider longer drying time depending on substrate. Limited resistance to weathering, light and UV-influences. To improve resistance, we recommend to varnish with Montana VARNISH Gloss 400ml. Recommended to use with Montana Fatcaps (e.g. black / orange).
Montana NIGHT GLOW Effect 400ml
NG1000 Luminescent Green
NG2000 Luminescent Orange
|DRYING TIME||Dust dry after approx. 15min. Touch Dry after approx. 60min. Fully cured after 24h. Drying time depends on temperature, humidity and thickness of coating.|
|TEMPERATURE RESISTANCE||Heat resistant up to 80°C
Recommended working temperature is between +10°C and +25°C.
Surface temperature: 5°C- 40°C
Humidity: 60% max.
|DURABILITY OF INGREDIENTS||
10 years (depending on substrate, grounding and exposure to environmental conditions)
Conforms to ASTM D-4236
|MANUFRACTURERS CERTIFICATES||ISO 14001:2004, ISO 9001 2008, ISO 14001:2004|
Diamteter: 65mm/height: 172mm (without cap)
Extremely flammable, irritant
|CONTENT/WEIGHT||11oz/400ml/424g (orange), 245 (green) NET|
Montana Level 4-6, Fatcap White/Orange
- Marking or highlighting escape routes or dangerous areas
- Grafting or upcycling
- Effect-paintings for nightclubs or bars
HOW TO USE
- Shake the can vigorously for 2-3 min. until mixing balls can be heard clearly (in case of longer pauses, the can should be shaken again)
- Application distance: 15-20cm
- Apply in min. 2-3 thin layers in a cross over way
- Choose a bright surface to apply on – pretreatment with S9100 will enhance luminance and productivity
- Can be sealed with Varnishes (luminance will be slightly reduced)
- Luminescent periods and intensity depend on layer thickness and exposition time to light source
- Stores and emits daylight or UV light
- Covering on various surfaces such as canvas, concrete, wood, paper, var. plastics or metals, etc.
- Low UV- and weather resistance (according to other fluorescent colors) and therefore preferably used indoors or without direct exposure to UV radiation
FREQUENTLY ASKED QUESTIONS
What is Montana NIGHTGLOW 400ml spray and how does it work?
Montana NIGHTGLOW EFFECT 400ml spray is a high pressure, high-grade nitro-acrylic based paint, that contains light emitting luminescent pigments. NIGHTGLOW EFFECT 400ml spray stores light as absorbed energy (charged) and emits that energy (as light), when in total darkness.
How long does Montana NIGHTGLOW EFFECT 400ml spray glow for?
Montana NIGHTGLOW EFFECT 400ml spray emits light for varying periods of time and at varying strengths. The glow effect is subject to the intensity and length of the exposure to light (that charges) and the amount of NIGHTGLOW EFFECT spray applied. The highest emission of light occurs immediately after charging.
How do I get the most glow out of my Montana NIGHTGLOW 400ml spray?
Montana NIGHTGLOW EFFECT 400ml spray works best if applied in thin, even, multiple coats. Pre-primed surfaces that are primed in white or light colors offer the most radiance. We recommend pre-priming with the Montana GOLD color SHOCK WHITE. The stronger the light source used for charging the paint, the greater the emission of light. The NIGHTGLOW effect is best viewed in total darkness, without other light sources.
How do I start using my Montana NIGHTGLOW EFFECT 400ml spray can?
Remove the spray nozzle and turn the can upside down. Strike with your palm allowing safety ring to fall out. Shake vigerously for 2-3 minutes ensuring you can hear the mixing balls moving freely. Replace the cap back onto the top of the can valve and trigger away from substrate to test. If flowing freely you can start painting.
Which surfaces can I use my NIGHTGLOW EFFECT 400ml spray on?
Montana NIGHTGLOW EFFECT 400ml spray can be used on smooth, rough and primed surfaces like metal, wood, hard plastics, primed carton and walls etc. NIGHTGLOW EFFECT 400ml spray can be used for interior or exterior projects.
How long does Montana NIGHTGLOW EFFECT 400ml spray take to dry?
The drying time for Montana NIGHTGLOW EFFECT 400ml spray varies depending on substrate, ambient temperature and levels of humidity. Please note a longer drying time then other Montana Cans spray products is required.
Is Montana NIGHTGLOW EFFECT 400ml spray as durable as other sprays?
Due to the completely man-made synthetic nature of the luminous pigments in NIGHTGLOW EFFECT 400ml spray, Montana NIGHTGLOW EFFECT 400ml spray has limited resistance to weathering, the ellements, light and UV influences. To increase its durability, apply Montana GLOSS VARNISH spray after the NIGHTGLOW EFFECT 400ml spray has completely dried and cured.
How far should I hold the can away from the substrate while painting?
Optimum distance from substrate is normally beween 15 and 25cm depending on your task. Thin, even layers are optimal.
What nozzle should I use to apply NIGHTGLOW EFFECT 400ml spray?
We recommend the use of fat cap nozzles on the NIGHTGLOW EFFECT 400ml spray. (e.g black/Orange cap)
How do I prevent getting drips?
Drips occur when the can is too close to the substrate during application, or spray passes occuring too slowly. You can either hold the can further away from the spray surface or increase the speed of your spray motion.